24V COB LED Strip Light 480 LEDs/M Dotless Single Color LED Tape Light

Product Description

             
   

24V COB LED Strip Light 480 LEDs/m Dotless Single Color Flexible LED Tape for Home & Commercial Lighting

Product Description

1. Good solution for linear light. It perfect achieve the Dot-Free lighting effect even if without any profile or PC cover.
2. Continuous and uniform linear illumination, with soft and elegant light, no glare.
3. Adopt Flip-Chip technology, no dead light risk.
4. Single point's current is small, which provides good heat dispersion, long life span and low luminous decay.
5. More flexible and bendable than the traditional led strip, it has a bending radius of only 5mm, so it can be any shape you want.
6. Suitable for furniture, KBB market or any corner application.
7. It's your new best choice for Lighting Market.
 

Item Type	COB
Led Model	K-COB480-P8R
LED Qty	480Leds/M
Voltage	DC12V/24V
Power	11W
Emitted colors	Warm White/Natural White/Cool White/RED/BLUE/ORANGE/YELLOW/GREEN
Cutting Size	25mm/50mm
Ra	90
CCT(K)	2700K/3000K/4000K/6500K
PCB Width	8mm
IP Rating	IP20/IP67
Bean Angel	180°
Certification	CE/RoHS

Product Feature:
Led Lighting New Trend--COB strip
Easy to bend and shape
Spot-free Lighting effect: 
No need to rely on other accessories to achieve a spot - free linear lighting effect.
Both Indoors & Outdoors
Various waterproof methods for choice: IP65-Silicone surface coating, IP65-Heat shrink, IP67-Silicone tube, IP68-Full injecting. 
It can meet all kinds of indoor and outdoor lighting needs.


1) Architectural decorative lighting
2) Archway, canopy and bridge edge lighting
3) Amusement park, theater and aircraft cabin mood lighting
4) Emergency hallway lighting
5) Auditorium walkway lighting
6) Stairway accent lighting
7) Concealed lighting
8) Backlighting for signage letters
9) Channel letter lighting
10) Emergency exit path lighting
11) Cove lighting
12) Edge-lit acrylic panel lighting



Reliability Test Items and Conditions:
 

No.	Test Item	Test Conditions	Note	Number of Damaged
01	Thermal Shock	-25ºC 15min ↑↓ 100ºC 15min	300 cycle	0/22
02	Life Test	Ta=25ºC	1000 hrs	0/22
03	Temperature Humidity Storage	Ta=85ºC RH=85%	1000 hrs	0/22

 Installation instruction:tion:

1. Please choose correct power supply for led strips. The total power of the led strip is about 80% of the power supply, and it cannot be fully
2. loaded to ensure that the power supply works at the correct and stable voltage.
3. We suggest 5 meters/roll for the led strip.If it is over 5 meters length, the brightness of LED will vary greatly.If the customer can accept the
4. case, length can be made over 5 meters/roll.
5. Adhesive tape on the back side of the strip,with its superior adhesive and weather resistance, and can be connected to any transparent glass, metal and plastic surface. But on some certain surfaces, such as cloth, wood, will affect its function and durability.Please test the adhesion of the led strip before installation.
6. Please pay special attention to the minimum bending diameter of the led strip is 60mm, so as to avoid direct or indirect damage to FPC and components on FPC, which may lead to damages of the strip .
7.  In order to ensure waterproof and anti-corrosive function , after the power line is screwed into the connector, it is recommended to inject the connector with a single component of silica gel (or neutral glass glue, or waterproof grease) and cover the exposed copper wire of the power line for protection.
8.  The non-waterproof led strip shall not be completely exposed for outdoor use. Do not touch or install the strip when it is charged.
9. It is recommended to use switch power supply that has passed relevant safety regulations (with short circuit protection, over voltage protection and over current protection)

   
     Installation requirement:

1. Pay attention to handling with care
2. Don't install the product in corrosion, flammable and explosive places;
3. It is strictly prohibited to use any acidic or alkaline adhesives to fix the product. Neutral adhesives are required;
4. In order to avoid the danger of electric shock, please cut off the power supply during process of installation,    debugging and moving;
5. Ensure correct and reliable connection of all joints;
6. The product need anti-corrosion environment, such as, avoiding damp, water drop or other adverse elements.
7. The LED strip and accessories can't be squeezed or folded;
8. PCB conductive parts can't be damaged when installation;
9. Installation must conform to electrical safety standard. The LED strip can only be installed by Professionals;
10. Ensure power supply transform operating load with transformer;
11. When install on metal or conductor surface, insulation protection need to be provided to the contact area;
12. Observe positive and negative polarity, ensure correct connection to avoid damaging LED strip;
13. When installation, please prevent static electricity;
14. If you have any questions about this product, please consult our salesman.

    Packaging and shipping :
     1. Packaging: 5 meters/roll,  Carton box packing  100 rolls per carton
     2. Delivery time: normally about 3-5 working days if less than 2000m. 
     3. Shipping by DHL, FedEx, UPS...Express, or Air, Sea transportations. 

 FAQ:
Q1: Are you factory or trading company?
A1:We are professional Manufacturer of LED Neon Light, Factory located in Shenzhen City. Factory direct price.

Q1 :How can you ensure high quality?
 A1:  1.We have our own material production workshop and die factory for 10 years.
         2. 300 workers, and workers should be well trained before go to work.
         3. 100% QC on line and final inspection, no any defective products can be out from our factory.
         4. We have a lot of certificates to ensure our quality, such as ISO9001:2015, ISO14001:2015,SGS certificate,  etc.

Q2:If I need sample, could you support?
A2: We can supply you with the sample for free, but the delivery charges will be covered by our customers. For avoiding the misunderstanding, it is appreciated if you can provide the International Express Account for Freight Collect.

Q3: Can you provide custom service?
A3: Yes! We have professional designer can provide free design for you. Please send your requirements to us!

Q4:How do you charge the mold fee?
A4: In case we need to open new mold for your ordered profiles, the mold fee will be refunded to customers when your order quantity reaches a certain amount.

Q5. How do you ship the goods and how long does it take to arrive?
A5: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q6. How to order custom LED light?
A6: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.

Q7. How long is your product warranty?
A7: We offer 2-5 years warranty to our products.
During the warranty time, if any quality problem we will repair or even replace for you for free.

Q8. What's your leadtime?
A8:. The sample order leadtime will be 3-5days .
      Small batch order 10-15 days
      Negotiable delivery time for large orders