360 Round WS2812B WS2811 Silica Gel Flexible Strip Light LED Neon Rope Tube Soft Lamp Tube IP67 Waterproof Led Strip
Product Description
Item name:KDY-N283530-120-20W-24V-18F3
Material: Silicon Tube
Tube diameter: 18mm
Input voltage: DC24V
Powered by: 1A power supply(not included)
Power: Max 20Watt/meter
IC Type: WS2835
LED Quantity: 120/LEDs/m
Bits/color: 8-bits/color; 24bit for RGB
Colors: RGB Full color, dream color
Tube color: Milky white
Beam angle: 360°
Protection rate: Wateproof IP67 (Power plug don't put in water)
Package : 1-5meters/roll
Lead time
| Quantity (meters) |
1 - 200 |
> 200 |
| Lead time (days) |
7 |
To be negotiated |
Detailed Photos
Certifications
Certification:
Factory:
Reliability Test Items and Conditions:
| No. |
Test Item
|
Test Conditions
|
Note
|
Number of
Damaged |
| 01 |
Thermal Shock
|
-25ºC 15min
↑↓
100ºC 15min |
300 cycle |
0/22 |
| 02 |
Life Test
|
Ta=25ºC
|
1000 hrs |
0/22 |
| 03 |
Temperature Humidity
Storage
|
Ta=85ºC
RH=85% |
1000 hrs |
0/22 |
Installation instruction:tion:
1. Please choose correct power supply for led strips. The total power of the led strip is about 80% of the power supply, and it cannot be fully
2. loaded to ensure that the power supply works at the correct and stable voltage.
3. We suggest 5 meters/roll for the led strip.If it is over 5 meters length, the brightness of LED will vary greatly.If the customer can accept the
4. case, length can be made over 5 meters/roll.
5. Adhesive tape on the back side of the strip,with its superior adhesive and weather resistance, and can be connected to any transparent glass, metal and plastic surface. But on some certain surfaces, such as cloth, wood, will affect its function and durability.Please test the adhesion of the led strip before installation.
6. Please pay special attention to the minimum bending diameter of the led strip is 60mm, so as to avoid direct or indirect damage to FPC and components on FPC, which may lead to damages of the strip .
7. In order to ensure waterproof and anti-corrosive function , after the power line is screwed into the connector, it is recommended to inject the connector with a single component of silica gel (or neutral glass glue, or waterproof grease) and cover the exposed copper wire of the power line for protection.
8. The non-waterproof led strip shall not be completely exposed for outdoor use. Do not touch or install the strip when it is charged.
9. It is recommended to use switch power supply that has passed relevant safety regulations (with short circuit protection, over voltage protection and over current protection
Installation requirement:
1. Pay attention to handling with care
2. Don't install the product in corrosion, flammable and explosive places;
3. It is strictly prohibited to use any acidic or alkaline adhesives to fix the product. Neutral adhesives are required;
4. In order to avoid the danger of electric shock, please cut off the power supply during process of installation, debugging and moving;
5. Ensure correct and reliable connection of all joints;
6. The product need anti-corrosion environment, such as, avoiding damp, water drop or other adverse elements.
7. The LED strip and accessories can't be squeezed or folded;
8. PCB conductive parts can't be damaged when installation;
9. Installation must conform to electrical safety standard. The LED strip can only be installed by Professionals;
10. Ensure power supply transform operating load with transformer;
11. When install on metal or conductor surface, insulation protection need to be provided to the contact area;
12. Observe positive and negative polarity, ensure correct connection to avoid damaging LED strip;
13. When installation, please prevent static electricity;
14. If you have any questions about this product, please consult our salesman.
Packaging and shipping :
1. Packaging: 5 meters/roll, Carton box packing 100 rolls per carton
2. Delivery time: normally about 3-5 working days if normal order
3. Shipping by DHL, FedEx, UPS...Express, or Air, Sea transportations.
FAQ
FAQ:
Q1 :How can you ensure high quality?
A1: 1.We have our own material production workshop and die factory for 10 years.
2. workers should be well trained before go to work.
3. 100% QC on line and final inspection, no any defective products can be out from our factory.
4. We have a lot of certificates to ensure our quality, such as ISO9001:2015, ISO14001:2015,SGS certificate, etc.
Q2:If I need sample, could you support?
A2: We can supply you with the sample for free, but the delivery charges will be covered by our customers. For avoiding the misunderstanding, it is appreciated if you can provide the International Express Account for Freight Collect.
Q3: Can you provide custom service?
A3: Yes! We have professional designer can provide free design for you. Please send your requirements to us!
Q4:How do you charge the mold fee?
A4: In case we need to open new mold for your ordered profiles, the mold fee will be refunded to customers when your order quantity reaches a certain amount.
Q5. How do you ship the goods and how long does it take to arrive?
A5: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q6. How to order custom LED light?
A6: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q7. How long is your product warranty?
A7: We offer 2-5 years warranty to our products.
During the warranty time, if any quality problem we will repair or even replace for you for free.
Q8. What's your leadtime?
A8:. The sample order leadtime will be 3-5days .
Small batch order 10-15 days
Negotiable delivery time for large orders
){kind=link}
){kind=link}